Installation And Instructions - Mitsubishi Electric 800 Series Installation Manualline

1 INSTALLATION AND INSTRUCTIONS

1.1 Inverter Type
Symbol Voltage class Symbol Structure, functionality
4 400V class 6
F R - F 8 4 6 - 00250 - E2 - 60 L2
Circuit board coating
Symbol
(conforming to IEC60721-3-3 3C2/3S2)
60 With
06 With
Rating plate
*1
Refer to the table below for the specification of the CA type.
Type Monitor output
CA Terminal CA:
(terminal CA
equipped model) Terminal AM:
Notes
l In this Installation Guideline, the inverter model name consists of the rated current value (SLD rated current value of the F800
standard model).
(Example) FR-F846-00250(11K)
l For selecting the right frequency inverter you should know details of your application and especially the load characteristic.
l For how to read the SERIAL number, refer to page 42.
1.1.1 Accessory
l Earthing (grounding) cable (1): For connection with a communication option. (Refer to page 3.)
l CD-ROM (1): Including the Instruction Manual (Detailed) and other documents.
Symbol Description
00023 to
IP55 compatible model
03610
Plated conductor Symbol
Without L2
With
Inverter model
Input rating
Output rating
Serial number
Country of origin
analog current output
(0 to 20 mADC)
analog voltage output
(0 to ±10 V DC)
Inverter rated current
(SLD rated current of the F800 standard model) [A]
EMC filter Operation panel
Built-in C2 filter FR-LU08-01
Built-in EMC
Control logic
filter
ON Source logic
*1
Symbol Type Communication type
E2 CA Ethernet
Initial setting
Rated Pr. 19 Base frequency
frequency voltage
50 Hz 8888
(95% of the power
supply voltage)
1