Specifications - Mitsubishi Electric 800 Series Installation Manualline

7 SPECIFICATIONS

7.1 Inverter rating
00023
Model FR-F846-ã
(0.75K)
*1
0.75
Applicable motor capacity [kW]
*2
1.6
Rated capacity [kVA]
Rated current [A] 2.1
*3
120% of rated motor capacity for 60 s, 150% of rated motor capacity for 3 s (max. surrounding air temperature 40 °C)
Overload current rating
*4
Three-phase 380 to 500 V
Rated voltage
Rated input AC voltage/
Three-phase 380 to 500 V 50 Hz/60 Hz
frequency
Permissible AC voltage
323 to 550 V 50 Hz/60 Hz
fluctuation
Permissible frequency
±5%
fluctuation
*5
2.1
Rated input current [A]
Power supply capacity
1.6
*6
[kVA]
Dust- and water-proof type (IP55)
Protective structure
UL Type12
Cooling system Self-cooling + internal fan
DC reactor Built-in
Approx. mass [kg] 15
*1
The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi Electric 4-pole standard motor.
*2
The rated output capacity indicated assumes that the output voltage is 440 V.
*3
The % value of the overload current rating indicated is the ratio of the overload current to the inverter's rated output current. For repeated duty, allow time for the
inverter and motor to return to or below the temperatures under 100% load.
*4
The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range. However, the
maximum point of the voltage waveform at the inverter output side is the power supply voltage multiplied by about √2.
*5
The rated input current indicates a value at a rated output voltage. The impedance at the power supply side (including those of the input reactor and cables) affects
the rated input current.
*6
The power supply capacity is the value when at the rated output current. It varies by the impedance at the power supply side (including those of the input reactor
and cables).
*7
For the power voltage exceeding 480 V, set Pr. 977 "Input voltage mode selection". (For details, refer to the FR-F800 Instruction Manual (Detailed).)
*8
UL Type 12 Enclosure-Suitable for Installation in a Compartment Handling Conditioned Air (Plenum)
*9
For compliance with IP55, remove the protective bushes and install the recommended cable glands.
00038 00052 00083 00126 00170
(1.5K) (2.2K) (3.7K) (5.5K) (7.5K)
1.5 2.2 3.7 5.5 7.5 11
2.7 3.7 5.8 8.8 12
3.5 4.8 7.6 11.5 16 23
*7
3.5 4.8 7.6 11.5 16
2.7 3.7 5.8 9 12
*9
*8
Forced-air-cooling + internal fan
15 15 15 16 17 26
00250 00310 00380 00470 00620
(11K) (15K) (18.5K) (22K) (30K)
15 18.5 22 30 37
18 22 27 33 43 53
29 35 43 57 70
23 29 35 43 57 70
18 22 27 33 43 53
26 27 27 59 60
00770 00930 01160 01800 02160 02600
(37K) (45K) (55K) (75K) (90K) (110K)
45 55 75 90 110
65 81 110 137 165
85 106 144 180 216
85 106 144 180 216
65 81 110 137 165
63 64 147 150 153
03250 03610
(132K) (160K)
132 160
198 248
260 325
260 325
198 248
189 193
35