2
INSTALLATION
2.1
Pre-installation instructions
Check that the inverter's input power and the control circuit power are both OFF.
CAUTION
• Do not mount or remove the control terminal option while the input power is ON. Doing so may damage the inverter or the control terminal
option.
• To avoid damage due to static electricity, static electricity in your body must be discharged before you touch the product.
2.2
Installation procedure
1.
Loosen the two mounting screws at the both side of the standard control circuit terminal block. (These screws cannot be
removed.) Slide down the control circuit terminal block to remove it.
Loosen the screws
24
INSTALLATION