Using Crane Lifting Lugs To Transport Power Blocks - Siemens SINAMIC S120 Equipment Manual

6.3.2

Using crane lifting lugs to transport power blocks

Crane lifting lugs
The power blocks are fitted with crane lifting lugs for transportation on a lifting harness in
the context of replacement.
The positions of the crane lifting lugs are illustrated by arrows in the diagram below.
NOTICE
Damage to the device due to improper transport
Improper transport can cause mechanical loads on the power block housing or the busbars,
which result in damage to the device.
• When transporting the power blocks, use a lifting harness with vertical ropes or chains.
• Do not use the power block busbars to support or secure lifting harnesses.
Figure 6-2
Air-Cooled Chassis Power Units - supplement to Motor Module 6SL3320-1TG41-5AA3
Equipment Manual, 10/2020, A5E50422764A
Crane lifting lugs on power block, frame size JX
Maintenance and service
6.3 Service
69