Advertisement
Before each use
Inspect the general condition of the tool. Check for
•
loose hardware or housing;
•
misalignment or binding of moving parts;
•
cracked or broken parts;
•
any other condition that may affect its safe condition.
Daily: air supply maintenance
Every day, maintain the air supply according to the component manufacturers'
instructions. Maintain the lubricator oil level. Drain the moisture filter regularly.
Performing routine air supply maintenance will allow the tool to operate more
safely and will also reduce wear on the tool.
Weekly: lubrication
Add a high-quality machine oil to the oil inlet by removing the oil screw (Fig. 7).
Quarterly (every 3 months): tool disassembly, cleaning and inspection
Have the internal mechanism cleaned, inspected and lubricated by a qualified
technician.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61134
Page 9
05
2021-1
Advertisement
