Advertisement
Operation Manual
Torque Wrench
61847
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WilTec 61847
Summary of Contents for WilTec 61847
- Page 1 Operation Manual Torque Wrench 61847 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 130 Nm. Lock the handle by turning the knurled or hexagon screw clockwise. Now the torque is set to 130 Nm, and the torque wrench ready to be used. © by WilTec Wildanger Technik GmbH Item 61847 Page 3 http://www.WilTec.de...
- Page 4 Use extra care with low torques being set with the wrench clicking. Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 61847 Page 4 http://www.WilTec.de...
Need help?
Do you have a question about the 61847 and is the answer not in the manual?
Questions and answers