WilTec 61033 Operation Manual

Turning arbor press

Operation Manual

Turning Arbor Press

61033

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!

Illustrations, functional steps and technical data may deviate insignificantly due to continuous further

developments.

Table of Contents

Need help?

Do you have a question about the 61033 and is the answer not in the manual?

Page 1 Operation Manual Turning Arbor Press 61033 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps and technical data may deviate insignificantly due to continuous further...
Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
Page 3 Mandrel size (㎜) Diameter of table (㎜) Tool holder inside diameter × depth (㎜) 10 × 25 Max. pressing force (t) 1 (9.8067 kN) Weight (㎏) © by WilTec Wildanger Technik GmbH Item 61033 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
Page 4 Spring ring Cover Handle Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 61033 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...