Advertisement
Quick Links
Operation Manual
Air Impact Wrench
61134
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61134
Summary of Contents for WilTec 61134
- Page 1 Operation Manual Air Impact Wrench 61134 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 WARNING! Disconnect the tool from the air source before making any adjustments, changing accessories or before storing the tool. Such precautionary measures reduce the risk of injury to persons. © by WilTec Wildanger Technik GmbH Item 61134 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 Obey the manual for the air compressor used with this power tool. • Install an in-line shut-off valve to allow immediate control over the air supply in an emergency, even if a hose is ruptured. © by WilTec Wildanger Technik GmbH Item 61134 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 1× impact wrench • 1× quick coupling • 1× oiler • 1× extension • 1× 4 mm hexagon socket wrench • 1× transport case • 10× sockets © by WilTec Wildanger Technik GmbH Item 61134 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 If an in-line oiler is not available, place 2 drops of oil into the air inlet of the tool at the beginning of each workday. More than this will be expelled from the exhaust of the tool during using (Fig. 3). © by WilTec Wildanger Technik GmbH Item 61134 Page 6 http://www.WilTec.de...
- Page 7 Caution! • Keep the tool pointed away from yourself and any other person at all times. • Never use a tool that leaks air or needs repair. © by WilTec Wildanger Technik GmbH Item 61134 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 8 • Keep all screws tight. Loose screws may cause personal injury. • Place two or three drops of pneumatic oil (included) into the air inlet of the tool daily. © by WilTec Wildanger Technik GmbH Item 61134 Page 8 http://www.WilTec.de http://www.aoyue.eu...
- Page 9 Add a high-quality machine oil to the oil inlet by removing the oil screw (Fig. 7). Quarterly (every 3 months): tool disassembly, cleaning and inspection Have the internal mechanism cleaned, inspected and lubricated by a qualified technician. © by WilTec Wildanger Technik GmbH Item 61134 Page 9 http://www.WilTec.de http://www.aoyue.eu...
-
Page 10: Troubleshooting
Lubricate using air tool oil according to prior in- Housing heats enough lubrication. structions. during use. Worn parts. Let a qualified technician inspect the internal mechanism and replace parts as needed. © by WilTec Wildanger Technik GmbH Item 61134 Page 10 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de... - Page 11 Exploded view Warning! Repairs must only be made by an authorized service partner or the manufacturer. Do not open or disassemble the power tool. © by WilTec Wildanger Technik GmbH Item 61134 Page 11 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 12 Rear cover Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 61134 Page 12 http://www.WilTec.de...