Table of Contents
Advertisement
Quick Links
Operation Manual
Electric Wrench
61000–61002, 61769
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Related Manuals for WilTec 61000
Summary of Contents for WilTec 61000
- Page 1 Operation Manual Electric Wrench 61000–61002, 61769 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
-
Page 3: Included Accessories
3.2000 lb has a 9.2 m aircraft cable with attached hook, 3500 lb has a 10.5 m aircraft cable • with attached hook Mounting Bracket for trailer hitch • Emergency crank handle and adjustable clutch • © by WilTec Wildanger Technik GmbH Item 61000–61002, 61769 Page 3 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... -
Page 4: Product Features
13. Remove adjusting keys and wrenches. Be sure that keys and adjusting wrenches are re- moved from the tool or machine work surface before operation. © by WilTec Wildanger Technik GmbH Item 61000–61002, 61769 Page 4 http://www.WilTec.de... -
Page 5: Installation
Connect the red clamp handle to the positive (+/red) terminal of your bat- tery. Note: Be sure you are using a 12 V automotive battery or equivalent, in good con- dition. © by WilTec Wildanger Technik GmbH Item 61000–61002, 61769 Page 5 http://www.WilTec.de... - Page 6 2. Index the heads of the plate studs into the keyhole slots on the back of the winch. 3. Attach the winch/adapter plate assembly to your trailer hitch, by inserting the trailer hitch ball through the shaped hole in the adapter plate. © by WilTec Wildanger Technik GmbH Item 61000–61002, 61769 Page 6 http://www.WilTec.de...
-
Page 7: Pulling Capacity
Pulling capacity is reduced as incline increases. For example, rolling capacity is reduced from • 6000 lb on flat ground to 1100 lb on a 45° incline. Please refer to the following chart for estim- ated pulling capacity (rolling weight) on various inclines. © by WilTec Wildanger Technik GmbH Item 61000–61002, 61769 Page 7 http://www.WilTec.de http://www.aoyue.eu... -
Page 8: Maintenance
1. Lubricate the cable occasionally with light oil. 2. Grease the gears every 6 months. To do this, remove the clutch knob and separate the left and right housing. Use any good quality waterproof grease. © by WilTec Wildanger Technik GmbH Item 61000–61002, 61769 Page 8 http://www.WilTec.de... -
Page 9: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.