Table of Contents
Advertisement
Quick Links
Operation Manual
ARTICLE 61134
1/2 Inch Air Impact Wrench
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 17
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Table of Contents
Related Manuals for WilTec 61134
Summary of Contents for WilTec 61134
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 17 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
-
Page 3: Important Safety Instructions
Avoid unintentional starting. Be sure the switch is off before connecting the air supply. Do not carry the tool with your finger on the switch or connect the tool to the air supply when switched on. Wash hands after handling. © by WilTec Wildanger Technik GmbH Seite 19 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 4 Keep hoses away from heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Otherwise this might result in personal injury or damage to the tool. © by WilTec Wildanger Technik GmbH Seite 20 http://www.WilTec.de http://www.aoyue.eu...
-
Page 5: Tool Service
Never pull the trigger unless nose is directed toward the work. Keep others in a safe distance from the tool while the tool is in operation as accidental ac- tuation may occur possibly causing injury. © by WilTec Wildanger Technik GmbH Seite 21 http://www.WilTec.de http://www.aoyue.eu... -
Page 6: Air Supply And Connections
Idle speed: 7000 rpm Max torque: 230 ft-lb Air consumption: 5 cfm Air inlet: 1/4” Max air pressure: 90 psi Accessories: 1x 5/32” hex key Oil bottle © by WilTec Wildanger Technik GmbH Seite 22 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 7: Functional Description
2 drops of oil into the tool’s air inlet at the begin- ning of each workday. More than this will be expelled from the tool’s exhaust during using (Fig.3). © by WilTec Wildanger Technik GmbH Seite 23 http://www.WilTec.de http://www.aoyue.eu... -
Page 8: Preparing The Tool
Connect air impact wrench to the air source using the recommended hose size. CAUTION: Keep tool pointed away from yourself and any other person at all times. Never use a tool that leaks air or needs repair. © by WilTec Wildanger Technik GmbH Seite 24 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 9: Operating The Tool
Clean and inspect the tool daily. Carefully check for proper operation of trigger and safety mechanism. Do not use the tool unless both the trigger and safety mechanism are functional, if the tool is leaking air or needs any other repair. © by WilTec Wildanger Technik GmbH Seite 25 http://www.WilTec.de http://www.aoyue.eu... -
Page 10: Regular Maintenance
Weekly – Lubrication: Add a high quality machine oil to the oil inlet by removing the oil screw (Fig.7) Quarterly (every 3 months) tool disassembly, cleaning and inspection: Have the internal mechanism cleaned, inspected and lubricated by a qualified technician. © by WilTec Wildanger Technik GmbH Seite 26 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 11: Troubleshooting
Lubricate using air tool oil according to prior instructions. ing use. not enough lubrication. Worn parts. Let a qualified technician inspect the internal mechanism and re- place parts as needed. © by WilTec Wildanger Technik GmbH Seite 27 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 12: Exploded Drawing
EXPLODED DRAWING Warning! Repairs must only be made by an authorized service partner or the manufacturer. Do not open or disassemble the power tool. © by WilTec Wildanger Technik GmbH Seite 28 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 13: Parts List
Rotor Blade Air Regulator Rotor Valve Stem Steel Ball Cylinder Spring Pin Cylinder Hose Adapter Rear End Plate Valve Sleeve Ball Bearing Reverse Valve Rear Gasket Bushing Rear Cover © by WilTec Wildanger Technik GmbH Seite 29 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 14 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.