About The Manual - Hino Motors 300 Series Mounting Manual

Purpose
Content
Important
ABOUT THIS MANUAL
This manual is provided the Body and Equipment
Manufacturers, including inter-mediate and/or final stage
manufacturers (hereinafter collectively referred to as Body and
Equipment Manufacturers), to provide :
(1) Technical instructions for Hino truck chassis with cab for
modification and mounting of bodies.
(2) An aid to Body and Equipment Manufacturers for producing
safe vehicles under their own discretion and responsibility.
(3) Other general advice for installation, modification or
alteration.
When Body and Equipment Manufacturers install any body
or other equipment or device on Hino truck chassis with
cab (hereinafter collectively referred to as Hino Chassis), or
modify or alter a Hino Chassis.
This manual contains chassis specifications and instructions
particular to model 300 series with US-04 emission control in
the Hino light duty trucks.
This instruction manual must be used in combination
with the Common Manual, No. KC-AA102.
• For more information on mounting of bodies and equipments
or on chassis modifications, refer to the appropriate workshop
manuals, parts catalogs, and maintenance guides and
owner's or driver's manual.
• The information in this manual is accurate to the best of
Hino's Knowledge at the time of going to press.
Hino reserves the right to modify any and all information
without notice and without obligation.
• Should more detailed data or information be needed, please
contact authorized Hino distributor.
- 1 -
KK-XZU215C