Rear Combination Lamp - Hino Motors 300 Series Mounting Manual

6 - 5 - 1

REAR COMBINATION LAMP

When chassis with cab are shipped, the rear combination lamp
assembly is temporarily installed onto the end of the frame.
Therefore, when installing it regularly, attach the combination
lamp assembly directly such that the direction indicator lamp
(umber) is outside and the back-up lamp (white) is inside of the
vehicle.
Do not install the rear combination lamps vertically so as not to
affect the performance of reflectors and drain holes.
(Drawing shows right-hand lamp only. Positions reversed for left side.)
Unit : mm
KK-XZU215C