After Welding; Final Inspection After Welding - Hino Motors 300 Series Mounting Manual

2 - 5 - 5

(4) After Welding

*

(5) Final Inspection after Welding

*
*
• Make sure to connect all signal circuit connectors in PCU.
• Put back fuses as original condition.
• Make sure to connect the DC-DC Converter.
• Make sure to connect the negative terminal of the battery.
And the terminal should be horizontally setting.
NO GOOD
• Re-paint the place where to be peeled off the paint for
grounding the welding equipment by same color.
• Restore each electronic instrument and equipment to its
original site.
• Install the SERVICE PLUG.
(Refer the 2-9 PRECAUTION ON BODY MOUNTING WORK)
• Inspect the operation and function of all electronic instruments
and equipments.
• Consult to each Hino sales dealer or distributor for the details
of inspection's procedure.
Peculiar to XKU417L-HKFQB3
BATTERY TERMINAL
GOOD
BATTERY
A : B = SAME HEIGHT
FXZ2 BATTERY
KK-XZU215C