Method Of Taking Electrical Power; Taking Power Directly From The Battery - Hino Motors 300 Series Mounting Manual

6 - 4 - 6

3) Method of Taking Electrical Power

(1) Taking power directly from the battery

If you intend to take electrical power for the body or equipment
directly from the battery, secure the battery cable and the body
power supply connector together with the same nut.
(For details, see the following figure.)
In this case, you must install a fuse at a suitable point in the
circuit and take precautions to prevent short circuits as these
may lead vehicle fires. When securing the cable and power
connector, make sure you tighten the nut properly.
KK-XZU215C