Radiator Grill Removal And Installation - Hino Motors 300 Series Mounting Manual

HOW TO REMOVE THE RADIATOR GRILLE
1) How to Remove Off the Radiator Grille
2) How to Install the Radiator Grille
3) Caution
KK-XZU215C
Upper side
Right side
Clip X 9 pieces (Narrow cab)
Clip X 13 pieces (Wide cab)
• Loosen the tapping screw or bolt, in the central part.
• Inserting your fingers into the clips underneath to pull them
toward you, remove the clips.
• Remove the clips in the same manner at the side.
Remove the clips from right side of the vehicle (left side
*
when viewed in front of the vehicle).
• Install the clips on the radiator grille.
• Install the radiator grille on the cab body by matching the
clips holes and pushing it in the order from the bottom to the
upper side.
• Install the tapping screw or bolt, at the central part.
• After confirming that there are no damages at nail part, etc.,
of the clips, install them.
Front side
Radiator grille
Bolt X 1 piece (Narrow cab)
Tapping screw X 2 pieces (Wide cab)
7 - 4
Grommet screw X 2 piece (Wide cab)
For wide cab only
AUSXZU201 07D003