The Noise Measures Of The Am Radio - Hino Motors 300 Series Mounting Manual

THE NOISE MEASURES OF THE AM RADIO

KK-XZU215C
Make sure to connect 2 earth wires between body and / or
equipment(hereinafter termed body) and chassis frame for the
noise preventing of the AM radio by the hybrid system.
• Between body and chassis frame
Connect one side of the earth wire to the center part of front
end of body and the other side to the chassis frame with the
fitting nut of parking brake cable bracket.
Tightening torque of nut : 18±5N·m
In order to secure an electric conductivity remove the paint of
the fixing part.
Make sure to give anti-rust treatment to the fixing part after
installing the each wire.
Remove the paint of
fixing part
The above figure is the example witch connected the earth
wire to the center part of front end of aluminum van and
the right side of chassis frame.
Fixing part of body
Earth wire
2 - 10 -1