Back-Up Buzzer - Hino Motors 300 Series Mounting Manual

6 - 7
BACK-UP BUZZER (OPTION EQUIPMENT)
1) Installation angle
2) Position
3) Precaution for painting
• If you move the back-up buzzer or modify the surrounding
parts of the chassis, observe the precautions as followings.
• Must be kept the permissible range of installing angles shown
in the figure below.
• If the installing angle is not within range, water will
accumulate inside the buzzer and may lead to failure.
• If you move the buzzer to make room for mounting a body,
reinstall it in a position where it is not exposed to splashing
with muddy water, stone or water.
• Make sure that the buzzer should be covered during painting
to protect the paint coming into buzzer from sound emitting
hole for avoiding failure of no sound.
KK-XZU215C