Ground Of The Welding Equipment - Hino Motors 300 Series Mounting Manual

KK-XZU215C

(2) Ground of the Welding Equipment

Connect the ground of the welding equipment near the place
where to be welded.
Welding to the chassis frame
• Connect the ground to the bolt (plating bolt) or chassis
frame near the place where to be welded.
• Peel off the paint where to be welded.
• Connecting the ground to the chassis spring is strictly
prohibited to prevent damage of the spring.
Welding to the cab body
• Connect the ground to the fixing bolt of cab hinge after
dismounting the front grille or to the cab body.
(3) Other Precautions
• To protect ancillary equipment from sparks during welding,
place fire-resistant covers over the rubber hoses, wire
harness, pipes, chassis spring and tires, etc.
• Perform to weld under most suitable conditions of the
welding, and minimize the heat influence to the circumference
where to be welded, and as far as possible to keep the
welding quality.
2 - 5 - 4