Software Reset (Restore Factory Settings) - RADEMACHER DuoFern HomeTimer 9498-UW Instruction Manual For The Electrical Connection And For Commissioning

19. Software reset (restore factory settings)

If necessary, you can erase all of your settings
and return the DuoFern HomeTimer to its
original factory settings.
Simultaneously press and hold all four keys
1.
for 5 seconds, until all of the icons are shown
on the display.
Next, the software version will be displayed
2.
for a few seconds.
All settings will be erased and reset to the
default factory settings.
3. The system returns to the installation wizard
automatically after resetting. Carry out the
initial settings, see page 22.
64
+
approx. 5 sec.
EN