i
15.1 Manual operation - jog mode
As soon as jog mode is activated, it is possible to manually operate the DuoFern HomeTimer in
jog mode. Jog mode provides a convenient way to configure Venetian blinds.
Pressing the respective operating key [ up / down ] for an extended period causes the DuoFern
HomeTimer to automatically move the Venetian blinds to the corresponding end position.
Example for manual control of Venetian blinds in jog mode.
/
1.
Press briefly
2.
or
2.1.
Press
3.
4.
Press briefly
or
Press
4.1.
Ventilation position, see page 54
If the ventilation position is configured, the roller shutters will first roll down to this position.
Pressing the [ Down ] key once more causes the roller shutters to continue downwards.
28
>
Select and confirm the desired DuoFern actuator
or [ ALLE] (ALL).
The Venetian blinds move upwards briefly.
The Venetian blinds open.
The Venetian blinds move up to the upper end point.
The Venetian blinds to stop in the interim.
The Venetian blinds move downwards briefly.
The Venetian blinds close.
The Venetian blinds move to the configured ventilation
position or to the lower end point.
EN