i
16.3 Remote log on / off
This function also enables DuoFern devices to be set to log-in/off mode, e.g. in order to register
a DuoFern actuator to additional DuoFern transmitters.
◆ This function can only be used if the desired DuoFern actuator has previously been
registered to the DuoFern HomeTimer.
Activate remote log on / off
Select and open menu 9.9.8 Remote
1.
log-on/off.
The number of the first actuator is indicated
a)
on the display.
Select and confirm the desired DuoFern
2.
actuator.
If necessary, a brief test signal can be sent
3.
to the selected actuator in order for it to be
uniquely identified.
Subsequently, the following display appears.
4.
5.
Continue with:
Activate registering mode on the DuoFern
actuator.
or
Activate logout mode on the DuoFern
actuator.
or
Quit log-in/out mode in each case on the
DuoFern actuator.
EN
35