17.4 Menu 2 - Configuration of opening and closing times [ / ]
The following example shows how to config-
ure an opening and closing time for Monday
to Sunday.
If you want to configure the opening and
closing times for another switching time
programme, first open menu 9.5 and select
the desired switching time programme,
see page 56.
Call up the main menu.
1.
Select and open menu 2 [
2.
times.
Select [ Alle ] (All) DuoFern actuators.
3.
Configure the switching time mode for
4.
the opening time [ ]:
◆ NORMAL
◆ ASTRO
◆ OFF
NORMAL
At the configured time, an [ Up ]-signal will
be sent to the assigned DuoFern actuators.
ASTRO
The control command is sent at the daily
re-calculated dawn time. The previously
configured opening time is interpreted as
"earliest at xx:xx hours".
40
] switching
Example:
The roller shutters open at the configured
opening time.
Example:
The roller shutters open at the daily re-
calculated dawn time.
EN