Setting The Local Sunshine Position - RADEMACHER DuoFern HomeTimer 9498-UW Instruction Manual For The Electrical Connection And For Commissioning

17.9.1 Setting the local sunshine position

The sunshine position can only be configured individually for each DuoFern actuator.
Notes on sunshine position
◆ The running time must be configured prior to setting the sunshine position (see page
52).
◆ The locally mounted light sensor may not be covered by the roller shutters when they
are moving downwards.
◆ Set the sunshine position in a way that the roller shutters remain above the light sensor.
Otherwise the light sensor cannot correctly measure the brightness level.
Call up the main menu.
1.
Select and open menu 4 [ ] Automated
2.
solar function.
Select a DuoFern actuator.
3.
Switch the automated solar functions on and
a)
confirm for the selected DuoFern actuator.
On = automated solar functions on
OFF = automated solar functions off
Subsequently the local sunshine position
4.
can be configured.
Move the roller shutters to the desired
a)
position.
Store the position of the sun on the DuoFern
b)
actuator and return to the main menu.
EN
47