Programme Sequence Indicator; At The End Of The Programme - Miele PG 8504 Operating Instructions Manual

Top line
Middle line
Bottom line
Top line
Middle line
Bottom line
Ending the
programme

Programme sequence indicator

After the programme has started, the programme sequence can be
followed on the three-line display.
- Programme name.
The following parameters can be checked using the  and  arrow
buttons:
- Current programme block, e.g.
- Actual or required temperature
(depending on the display set, see "Further settings/Display:
Temperature")
- Time left (in hours; under an hour, in minutes).

At the end of the programme

The following messages and parameters appear at the end of a
programme:
- Programme name.
- Temperature
(required temperature of the final wash phase)
- Programme finished.
The LED in the Start/Stop button goes out. In the factory default
state, an acoustic tone also sounds for approx. 10 seconds (see
"Settings/Volume").
Open the door to end the programme. The machine must be

switched on when you do this.
Short
Main wash
Time left
15
Main wash
Operation
Min
57