Water softener
30
Setting the water hardness level
Water hardness can be set between 0 and 12.6 mmol/l (0 - 70 °dH).
Further settings
Open the
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Water hardness
The bottom line of the display shows the possible input range.
Water hardness input values can be found in the chart on the next
page.
Where the water hardness fluctuates, e.g. between 1.4 - 3.1 mmol/l
(8 - 17 °dH), always programme the machine to the higher value,
3.1 mmol/l (17 °dH) in this example.
Set the water hardness level using the arrow buttons
( = higher and = lower).
Press OK to save the setting.
menu by switching the machine off with
Water hardness
19
°dH
(0 - 70
°dH )