Factory Default; Software Version - Miele PG 8504 Operating Instructions Manual

All settings

Factory default

All parameters which have been altered can be reset to their default
settings. Control parameters and programme settings are reset
separately.
Further settings
Open the

the  button and then switch it on again with the  button whilst
keeping the  button held in.
Open the menu as follows:

Further settings

 Factory default
Reset

- No
Altered parameters are maintained.
Programme settings only
-
All programme settings are reset.
Programmes saved on free memory locations remain unchanged.
All settings
-
All control parameters including dispensing quantities and water
hardness will be reset.
Select an option using the  and  arrow buttons.

Confirm your selection with OK.

The machine is restarted.
All settings
When is selected and the machine is restarted, you will be
prompted to re-enter basic parameters such as the language, date,
time, water hardness, etc.
Enter the language, date, time etc.

When the last entry is made, all the parameters are saved and the
factory default settings have been reset. The display changes and
shows the last selected programme.

Software version

You can use this menu to call up the software versions of individual
elements, e.g. when contacting Miele Service.
For more information see "Service".
menu by switching the machine off with
Reset
No
Programme settings only
Further settings
91