Volume - Miele PG 8504 Operating Instructions Manual

Settings 
68

Volume

A buzzer which is integrated into the control panel can give an
acoustic signal in the following situations:
- When buttons are pressed (keypad tone)
- At the end of the programme
- System messages (information)
Open the systems menu by switching the machine off with the 

button and then with the  held in switch it back on with the 
button.
Open the menu as follows:

 Settings 
Volume

- Buzzer tones
Setting the buzzer volume for programme end and system
messages (information)
Keypad tone
-
Setting the buzzer volume for keypad tone.
Select an option using the  and  arrow buttons.

Confirm your selection with OK.

Keypad tone
When has been selected you can adjust the volume
immediately. When
Warning
select which tone,
adjust the volume for.
Keypad tone
Quieter
The volume level is represented by a bar chart. On the lowest setting
the buzzer tone is switched off.
Use the arrow buttons  (

Press OK to save the setting.

Buzzer tones
Keypad tone
Buzzer tones
Buzzer tones has been selected you must first
Programme end
or
Louder
Louder ) and  (
, you would like to
Programme end
Quieter Louder
Quieter
) to set the volume.