Switching On; Starting A Programme; Programme Sequence Indicator Lights - Miele G 698 Plus Operating Instructions Manual

Operating the dishwasher

Switching on

^ Make sure the spray arms are not ob-
structed.
^ Close the door.
^ Open the stopcock, if it is closed.
^ Press the On/Off button (15).
All the programme button indicator
lights (16) will light up and the
"Start/Stop" indicator light will flash.

Starting a programme

^ When selecting a programme, refer
to the programme chart at the end of
the operating instructions.
^ Press button (16) for the programme
you want.
All indicator lights next to the
programme buttons, except the one for
the programme selected, go out.
The "Start/Stop" indicator light will start
flashing.
32
The running time of the programme se-
lected appears in the time display (18)
in hours and minutes. The "Time Left"
indicator light comes on.
The additonal options "Delay start" or
"Top Solo" can now be selected if
wished (see "Additional options").
^ Press the "Start/Stop" button (21).
The "Start/Stop" indicator light will come
on. The programme cycle begins.
Do not finish a programme prema-
turely. Important programme stages
(e. g. reactivating the water softener)
could be omitted.
Programme sequence
indicator lights (14)
After a programme has been started
the current stage of the programme is
indicated by the programme sequence
indicator lights.