Further settings
76
Moving a programme: allocating programme selection
buttons
You can sort the programme selection list to suit your requirements
and therefore also allocate the programme selection buttons ,
and .
Further settings
Open the
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Move programme
All released programmes are shown in the programme list (see
"Further settings/Programme release"). A programme's position in the
programme list is decisive for allocating the programme selection
buttons. Programmes are numbered from 1 - n. The first three
programmes in the list are allocated to the programme selection
buttons; for example:
1. Short
on programme selection button
-
2. Medium
on programme selection button
-
3. Long
-
on programme selection button
-
4. Demineralised rinse
5. Rinsing
-
- etc.
Use the and arrow buttons to select the programme you would
like to move.
Confirm your selection with OK.
Now you can move this programme within the list.
Use the and arrow buttons to move the programme to the
position you want.
Press OK to save the programme to the selected position.
The programme which was previously saved to this position and all
subsequent programmes are moved down by one position.
The process can be repeated as often as you wish.
Press the button to exit the menu.
menu by switching the machine off with
Move programme
1.
Short
2.
Medium