Hide thumbs Also See for AN19E:

Advertisement

WARNING: Excessive torque may damage the mainboard. When
using an electric screwdriver on the mainboard, make sure that
the torque is set to the allowable range of 5.0 ~ 8.0kg/cm.
Mainboard components contain very delicate Integrated Circuit
(IC) chips. To prevent static electricity from harming any of the
sensitive components, you should follow the following precau-
tions whenever working on the computer:
1. Unplug the computer when working on the inside.
2. Hold components by the edges and try not to touch the IC
||||chips, leads, or circuitry.
3. Wear an anti-static wrist strap which fits around the wrist.
4. Place components on a grounded anti-static pad or on the bag
that came with the component whenever the components are
separated from the system.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AN19E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FIC AN19E

  • Page 1 Quick Reference WARNING: Excessive torque may damage the mainboard. When using an electric screwdriver on the mainboard, make sure that the torque is set to the allowable range of 5.0 ~ 8.0kg/cm. Mainboard components contain very delicate Integrated Circuit (IC) chips. To prevent static electricity from harming any of the sensitive components, you should follow the following precau- tions whenever working on the computer: 1.
  • Page 2 AN19E/AN19C Mainboard Manual Mainboard Layout 4 - 2...
  • Page 3 Quick Reference 1). Clear CMOS, CPU Host Clock Select Front Panel Block Cable Connection 4 - 3...
  • Page 4 AN19E/AN19C Mainboard Manual CPU Fan Installation 4 - 4...

This manual is also suitable for:

An19c

Table of Contents