Servaid; Safety Data Sheets Msds/Sds; Country Of Origin; Dimensional Drawings - Atlas Copco S8020-WS Product Instructions

Product Information

ServAid

ServAid is a portal that is continuously updated and contains Technical Information, such as:
■
Regulatory and Safety Information
■
Technical Data
■
Installation, Operation and Service Instructions
■
Spare Parts Lists
■
Accessories
■

Dimensional Drawings

Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local Atlas Copco representative.

Safety Data Sheets MSDS/SDS

The Safety Data Sheets describe the chemical products sold by Atlas Copco.
Please consult the Atlas Copco website for more information www.atlascopco.com/sds.

Country of Origin

For the Country of Origin, please refer to the information on the product label.
Dimensional Drawings
Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.
Please visit: http://webbox.atlascopco.com/webbox/dimdrw

Overview

Technical Product Data

Technical Product Data can be found on either ServAid, or the Atlas Copco website.
Please visit: https://servaid.atlascopco.com

Bit Grounding Test

Bit grounding is measured by the ground circuit stability and resistance with the tool running at no load
with a rotation speed of 1000 rpm.
The resistance is measured between the bit and the outside of the tool connector.
The measurement of the resistance is between 1~ 20Ω.
4
EN
or www.atlascopco.com.
© Atlas Copco Industrial Technique AB - 9839 2054 01
or https://servaid.atlascopco.com.
S8020-WS