Warranty; Servaid; Website; Safety Data Sheets Msds/Sds - Atlas Copco ETD SL21-07-I06-PS Product Instructions

Table of Contents

Advertisement

ETDSL21-07-i06-PS
NOTICE

Warranty

Product warranty will expire 12 months after the product is first taken into use, but will in any case ex-
pire at the latest 13 months after delivery.
Normal wear and tear on parts is not included within the warranty.
Normal wear and tear is that which requires a part change or other adjustment/overhaul during
standard tools maintenance typical for that period (expressed in time, operation hours or other-
wise).
The product warranty relies on the correct use, maintenance, and repair of the tool and its component
parts.
Damage to parts that occurs as a result of inadequate maintenance or performed by parties other
than Atlas Copco or their Certified Service Partners during the warranty period is not covered by the
warranty.
To avoid damage or destruction of tool parts, service the tool according to the recommended mainte-
nance schedules and follow the correct instructions.
Warranty repairs are only performed in Atlas Copco workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art preventive maintenance through its ToolCover
contracts. For further information contact your local Service representative.
For electrical motors:
Warranty will only apply when the electric motor has not been opened.

ServAid

ServAid is a portal that contains technical information for all hardware and software products, such as:
- Regulatory and Safety information
- Technical data
- Installation, Operation and Service instructions
- Spare parts lists
- Accessories
ServAid is continuously updated and is available at:
For further information contact your local Atlas Copco representative.

Website

Log in to Atlas Copco: www.atlascopco.com.
You can find information concerning our products, accessories, spare parts and published matters on our
website.

Safety Data Sheets MSDS/SDS

The safety data sheets describes chemical products sold by Atlas Copco.
For more information, consult the website:
www.atlascopco.com/sds

Country of origin

Please refer to the information on the product label.
NOTICE is used to address practices not related to personal injury.
© Atlas Copco Industrial Technique AB - 9836 8058 01
EN
https://servaid.atlascopco.com
Product information
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

8433210769

Table of Contents