Table of Contents
Advertisement
Quick Links
Printed Matter No. 9836 8058 01
Publication Date 2022-02-14
Valid from Serial No. A1460001
ETD SL21-07-I06-PS
(1.5-7.5 Nm)
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
ETDSL21-07-i06-PS
8433210769
WARNING
Electric screwdriver
Product Instructions
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Atlas Copco ETD SL21-07-I06-PS
Summary of Contents for Atlas Copco ETD SL21-07-I06-PS
- Page 1 Printed Matter No. 9836 8058 01 Electric screwdriver Publication Date 2022-02-14 Valid from Serial No. A1460001 Product Instructions ETD SL21-07-I06-PS 8433210769 (1.5-7.5 Nm) WARNING Read all safety warnings and instructions Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.
-
Page 2: Table Of Contents
Overhaul .................... 10 Lubrication instructions ................... 10 Lubricant Guide ................... 10 Lubrication ................... 11 Repair instructions .................. 11 Repair .................... 11 Troubleshooting.................... 12 Power Focus 3000/4000................. 12 If the tool becomes very hot................ 12 Power Focus 600/6000................... 12 Recycling ....................... 13 © Atlas Copco Industrial Technique AB - 9836 8058 01... - Page 3 Recycling instruction.................. 13 © Atlas Copco Industrial Technique AB - 9836 8058 01...
-
Page 4: Product Information
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. © Atlas Copco Industrial Technique AB - 9836 8058 01... -
Page 5: Warranty
■ Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Atlas Copco or their Certified Service Partners during the warranty period is not covered by the warranty. ■ To avoid damage or destruction of tool parts, service the tool according to the recommended mainte- nance schedules and follow the correct instructions. -
Page 6: Dimensional Drawings
(>30mA) and if leakage occurs, the drive is switched off (30ms). Changing, interfering or tampering with the protection system voids all warranty and obligations from Atlas Copco. Trouble-shoot- ing and re-start of the system may only be carried out by an authorized person. Check the function of the EFP on a regular basis by pressing the trip-button. -
Page 7: Installation
POWER FOCUS/drive unit. Any changes made of these values in the POWER FOCUS while the tool is connected will be stored in the tool memory. © Atlas Copco Industrial Technique AB - 9836 8058 01... -
Page 8: Operation
The soft-start function facilitates entering the screw head and thread. The duration of the soft start is adjustable, see the manual for the drive unit. The tool is equipped with signal lights, ■ Green = OK tightening © Atlas Copco Industrial Technique AB - 9836 8058 01... - Page 9 Yellow = Warning – low torque (not for ES) ■ Red = Warning – high torque ■ Orange = Function indicator (only for SL and DL) ■ Blue = Function indicator (only for SL) © Atlas Copco Industrial Technique AB - 9836 8058 01...
-
Page 10: Service
If you decide that the electric motor is defect or in need of service, return the complete motor unit to Atlas Copco Industrial Technique for replacement. Motors which have been opened by anyone else than Atlas Copco Industrial Technique will not be ser- viced. -
Page 11: Lubrication
For more information, see Spare Parts section in ServAid - https://servaid.atlascopco.com. Repair instructions Repair Repair must only be carried out by qualified authorised personnel. For further information contact your lo- cal Atlas Copco sales representative. © Atlas Copco Industrial Technique AB - 9836 8058 01... -
Page 12: Troubleshooting
Is the unit switched on? Check the earth fault circuit breaker behind the front door. Should it have tripped, make sure to find the primary fault before resuming operation. Check that the wiring on the remote start connector is correct. For further information see 9836 4954/9836 7446. © Atlas Copco Industrial Technique AB - 9836 8058 01... -
Page 13: Recycling
When a product has served its purpose it has to be recycled properly. Dismantle the product and recycle the components in accordance with local legislation. Batteries shall be taken care of by your national battery recovery organization. © Atlas Copco Industrial Technique AB - 9836 8058 01... - Page 16 Original instructions © Copyright 2022, Atlas Copco Industrial Technique AB. All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. Atlas Copco Industrial This applies in particular to trademarks, model denominations, part numbers Technique AB and drawings.
Need help?
Do you have a question about the ETD SL21-07-I06-PS and is the answer not in the manual?
Questions and answers