Washers
Step 3:
Step 4:
32
pin through the washers and into the hole on the lower hinge.
Taper pin
ESR3-48 lower hinge
Figure 4: Installing the bottom taper pin
Hold the door in place and insert the other taper pin, narrow end down, through the top
hinge and washer.
Taper pin
Figure 5: Installing the top taper pin
Take the Sensor3 beacon block, insert it through the slot on the upper left corner of the
door and secure it with two Phillips head screws (included).
Figure 6: Installing the beacon block
Door
ESR3-12 lower hinge
Washers
Door
Taper pin
Sensor3 CE Rack (ESR3) Installation Manual