Advertisement
Installing Three-Slot Dimmer Lug Strips
Step 1:
Step 2:
Step 3:
Step 4:
Land Load Wires
Use a Phillips screwdriver to remove the two
screws securing the lug strip to the left side of the
rack.
Remove the lug strip and replace it with one
containing a three-slot Neutral jumper.
Secure the strip to the rack with the screws you
removed in Step 1.
Secure the jumper to the main Neutral bus PEM
inserts using the two screws provided with the
jumper.
Figure 8: Removing or installing a
Neutral lug strip
21
Advertisement
