Advertisement
CAUTION:
Step 1:
Step 2:
Bottom hinge
being inserted
Bottom hinge
being inserted
Finishing Installation
Dimmer rack doors filter and regulate ventilation airflow. Operating without
the door can contaminate the rack interior with dust and cause rack modules
to overheat.
Insert the top hinge into the slot on the top of the rack and attach it to the frame with
two Phillips head screws (included).
Top hinge being inserted
Figure 1: Attaching the top door hinge
The bottom hinge on the ESR3-12 is a different design from the one used on the
ESR3-24, ESR3-26 and ESR3-48.
• ESR3-12 – Insert the bottom hinge into the slot on the bottom of the rack and
attach it to the frame with two Phillips head screws (included).
Figure 2: Attaching the ESR3-12 bottom hinge
• ESR3-24, ESR3-36 and ESR3-48 – Remove the large Phillips head screw, insert the
hinge into the slot and secure it by replacing the screw.
Figure 3: Attaching the ESR3-48 bottom hinge
• Drive the narrow end of one taper pin into the bottom of the door. Put the taper
Top hinge in place
Bottom hinge
in place
Bottom hinge
in place
31
Advertisement
