Advertisement
Introduction
Welcome to the installation manual for Sensor
safe and efficient installation of Sensor3 rack dimming systems. There are four sizes of installation
racks:
• ESR3-12 – Twelve dimmer slots (up to 24 circuits)
• ESR3-24 – Twenty-four dimmer slots (up to 48 circuits)
• ESR3-36 – Thirty-six dimmer slots (up to 72 circuits)
• ESR3-48 – Forty-eight dimmer slots (up to 96 circuits)
How to use this Guide
Use this guide during system installation. It contains complete installation instructions.
Prepare for Installation
•
installation, like space, power and cooling requirements for your Sensor3 installation.
Installation of Racks
•
feeder cables.
Land Load Wires
•
Control and Data Connections
•
data wiring to your rack.
Finishing Installation
•
operations in this chapter should be performed by ETC trained technicians.
When viewing this document in electronic form (.pdf file) with Adobe Acrobat Reader, blue italicised
text followed by a page number such as
If you click on the link, it will jump to that section or topic.
Warning and Notice Conventions
These symbols are used in the Sensor3 documentation to alert you to danger or important information.
Note:
CAUTION:
WARNING:
WARNING:
Introduction
page 7
on
tells you about things you should check before commencing
page 9
on
tells you how to mechanically install the racks and connect the
page 17
on
tells you how to connect the outgoing wiring to your loads.
page 22
on
page 29
on
tells you how to finish the installation of your rack. Note that the
How to use this Guide
Notes are helpful hints and information that is supplemental to the main text.
A Caution statement indicates situations where there may be undefined or
unwanted consequences of an action, potential for data loss or an equipment
problem.
A Warning statement indicates situations where damage may occur,
people may be harmed, or there are serious or dangerous
consequences of an action.
RISK OF ELECTRIC SHOCK! This warning statement indicates situations
where there is a risk of electric shock.
®
3 CE racks. This manual contains the procedures for
tells you how to connect DMX, Ethernet and other
page 5
on
is a link within the document.
5
Advertisement
