Advertisement
480 mm
ESR3-48 Floor mount hole diagram
Securing Sensor3 Racks to a Wall
Racks installed on the floor or a pedestal can also be secured to a wall for greater stability.
Step 1:
WARNING:
Step 2:
Note:
Step 3:
Step 4:
Step 5:
Installation of Racks
32 mm
79 mm
294 mm
511 mm
Dia. 10 mm
373 mm
Figure 2: Hole diagrams for mounting racks to the floor
Prepare the rack for floor or pedestal mounting
on the Floor
page 10
on
Make sure the holes for the mounting hardware are located where
the hardware cannot come into contact with electrical wiring. Make
all modifications in accordance with your country's electrical codes.
Mark the locations for your securing hardware on the wall.
• For ESR3-12 or ESR3-24 racks, use the diagram in Figure 1 to determine where you
need to install your hardware.
• For ESR3-36 and ESR3-48 racks, put the rack in position and mark the holes
directly.
Be sure to level your racks before marking the hole positions.
Drill holes or install mounting hardware in the marked locations.
Finish mounting the rack to the floor or pedestal.
Attach the rack to the wall with your securing hardware.
ESR3-36 / ESR3-24 Floor mount hole diagram
(Installing ESR3-36 and ESR3-48 Racks
Pedestal Mounting an ESR3-24 Rack
or
32 mm
79 mm
294 mm
404 mm
Dia. 10 mm
373 mm
page
10).
on
436 mm
11
Advertisement
