Service Codes For Acyclic Operation; Status Codes For Acyclic Services - Danfoss VLT Soft Starter MCD 600 Installation Manual

EtherNet/IP Card
Installation Guide

7.2.3.1 Service Codes for Acyclic Operation

Table 7: Supported Services for Vendor-specific Objects
Service code Function
01d (0x01) Get attribute all
10d (0x10) Set attribute single
15d (0x0E) Get attribute single

7.2.3.2 Status Codes for Acyclic Services

Table 8: Status Codes Returned in Response to Get/Set Attribute Single
Status code Status name
00d (0x00) Success
03d (0x03) Invalid parameter value
05d (0x05) Path destination unknown
08d (0x08) Service not supported
09d (0x09) Invalid attribute value
15d (0x0E) Attribute not settable
20d (0x14) Attribute not supported
22d (0x16) Object does not exist
Danfoss A/S © 2020.12
Description
Only supported for class 0x01 identity object
Supported
Supported
Details
This code is returned when:
• the register mapped for Get Attribute Single is successfully read.
• the register mapped for "Set Attribute Single" is successfully set.
–
The mapped register does not exist.
The requested service is not available for this object class/instance.
This code only applies to the service Set Attribute Single. It is returned if the value is
out of range of the mapped register.
This code only applies to the service Set Attribute Single. It is returned if the mapped
register is read-only.
The attribute specified in the request is not supported.
The object specified does not exist in the device.
Messaging
AN353423548483en-000101 / 130R0945 | 23