Table of Contents
Advertisement
installation
Wall Board/Drywall Installation G600EC
WARNING! Risk of Fire! Comply with all minimum clearances to combustibles as specified.
Finishing Instructions:
It is important to follow the framing and finishing instructions to ensure proper placement of fireplace into the surrounding framing/finishing materials.
Wall board materials 1/2 in. (13 mm) thick are specified in this installation manual to properly align with the optional finishing methods offered with this appli-
ance. The G600EC may be finished to the appliance opening with 1/2 inch (13 mm) thick drywall or non combustible material depending on the application
and requirements. The nailing flanges allow for adjustments up to 1-1/4" (32 mm) thickness of material.
• Ensure that the back and side clearances are maintained.
WARNING! Risk of Fire! Maintain specified air space clearances to combustibles. Inadequate air space could cause overheating and fire.
The appliance is designed to be used with 1/2 in. (13 mm) wall sheathing materials such as drywall, plywood, wood composites, or non-combustible materials.
Thicker materials may be used. Refer to facing and finishing details in this manual.
Facing Material
• Facing and/or finishing materials must never overhang into the glass opening.
• Facing materials may be combustible or non-combustible
WARNING! Risk of Fire! DO NOT apply combustible materials beyond the minimum clearances. Comply with all minimum clearances to combustibles as
specified in this manual. Overlapping materials could ignite and will interfere with proper operation.
PAINTING
If desired finishing includes a painted wall, 100% acrylic latex, oil-based or standard acrylic paints may be used.
Follow paint manufacturer's instructions for paint and primer application.
NO SCREW ZONE
|
43
Grandview® G600EC Gas Fireplace
Hide quick links:
Advertisement
Table of Contents
