Table of Contents
Advertisement
Wiring Diagram Without Thermostat
WARNING:
Electrical Grounding
Instructions
This appliance is equipped with
a three pronged (grounding)
plug for your protection against
shock hazard and should be
plugged directly into a properly
grounded three-prong recep-
tacle. Do not cut or remove the
grounding prong from this plug.
The fire on this fireplace does not require a 120V
A.C. supply for operation. In case of a power fail-
ure, the remote control/thermostat will continue to
operate as long as there are 4 AA batteries in the
remote receiver. See note below. Both the optional
fan and standard lights require 120 volt power in
order to operate.
Note:
4 AA Batteries must be installed into the back
up battery compartment however for this unit to
operate when power is lost. See battery back
up instructions in this manual The fan will not
operate during a power outage.
installation
CAUTION: Ensure that the wires
do not touch a hot surface and are
away from sharp edges.
Caution: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper and dangerous operation.
Verify proper operation after servicing.
WHITE
BLACK
BLACK
YELLOW
YELLOW
BOTTOM LIGHTS
Grandview® G600EC Gas Fireplace
TOP LIGHT
|
77
Hide quick links:
Advertisement
Table of Contents
