Regency Fireplace Products Grandview G600EC-NG Owners & Installation Manual page 46

installation
10. Install the exhaust collar onto the rear. Hang the collar onto the 2 previously
loosened bottom screws, secure in place with the 4 top screws, and then
tighten the 2 bottom screws.
11. Install the intake collar onto the rear. Hang the collar onto the previously
loosened bottom screws, secure in place with the 2 top screws, and then
tighten the 2 bottom screws.
46 |
Grandview® G600EC Gas Fireplace
Diagram 16
Diagram 17
Diagram 18
12. Reinstall the collar trim with 6 screws.
Diagram 19
Hidden screw