Transport, Intermediate Storage - MTS Sensors Temposonics Off-Highway C Series Installation Manual

C-Series Off-Highway
Installation Manual

7. Transport, intermediate storage

When transporting the cylinders, make sure that the cables and
connectors are not under tensile stress. When handling/storing
carelessly, connectors and cables can be squeezed easily between
stacked cylinders.
Moreover, it is necessary to encapsulate the connections or exposed
cable ends using an antistatic bag. For this, the original bags (part
no. 403287) can be re-used. Furthermore, it is important to re-fit the
dust protective caps (MTS material number GZ0605) on the MTS
M12 connector system (IP69K) after installation of the connector. The
cylinders storage conditions should be as dry as possible.
I 17 I