Operation; The On/Off Button; To Start The Product; Operating Modes - Gardena SILENO city Operator's Manual

Hide thumbs Also See for SILENO city:
Table of Contents

Advertisement

4.1 The ON/OFF button

WARNING:
instructions carefully before you start the
product.
WARNING:
away from the rotating blades. Do not put
your hands or feet close to or under the
machine when the blade motor is running.
WARNING:
when persons, especially children, or
animals are in the work area.
Push the ON/OFF button for 3 seconds to switch
on the product. The product is active when the
indicator lamp on the keypad is lit.
Push the ON/OFF button for 3 seconds to switch
off the product.
The product is in power save mode if the indicator
lamp flashes. Push the ON/OFF button for 3
seconds to switch on the product.
4.1.1 The indicator lamp
WARNING:
inspection or maintenance on the product
when the product is disabled. The product is
disabled when the lamp on the keypad is not
lit.
The indicator lamp on the keypad is an important status
indicator:
The product is active if the indicator lamp lights
continuously.

30 - Operation

4 Operation
Read the safety
Keep your hands and feet
Do not use the product
It is only safe to carry out
The product is in power save mode if the indicator
lamp flashes. Push the ON/OFF button for 3
seconds to make the product active again.
The product is disabled when the indicator lamp is
not lit.

4.2 To start the product

1.
Open the hatch to the keypad.
2.
Push the ON/OFF button for 3 seconds. The
display is lit up.
3.
Use the up/down arrow buttons and the OK button
to enter the PIN code.
4.
Select the desired operating mode and confirm
with the OK button. Refer to
page 30 .
5.
Close the hatch.
Note:
The first weeks after installation the perceived
sound level when cutting the grass may be higher than
expected. When the product has cut the grass for some
time, the perceived sound level is much lower.

4.3 Operating modes

Push the Mode button to select the following operating
modes:
Main area
Secondary area
Park
Park / Schedule
Override schedule
Spot cutting
Operating modes on
1298 - 007 - 16.09.2020

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents