Gardena SILENO city Operator's Manual page 29

app. The following settings are blocked in the menu
selection of the smart product:
• Schedule
• Time & Date
• Language
• Country
3.10.13.1 To set the Activate Inclusion Mode
In order to include your smart product into the
GARDENA smart system app:
To get access to the menu on
1. Do steps 1–3 in
page 23 .
2. Use the arrow buttons and the OK button to enter
the menu smart system .
3. Use the right arrow button and the OK button to
Yes to Activate Inclusion Mode .
select
4. Use the up/down arrow buttons to enter the PIN
code and push the OK button.
5. The inclusion code is shown in the product display.
6. Follow the instructions in the GARDENA smart
system app.
The inclusion sequence might take several minutes.
Once the inclusion has succeeded you will automatically
return to the product start screen. If the inclusion by any
reason fails, try again.
3.10.13.2 Inclusion in the App
The inclusion of all GARDENA smart devices takes
place over the smart system app.
To download the GARDENA smart system app
1. Download the GARDENA smart system app from
App Store or Google Play.
2. Open the app and register as a user.
3. Log in and choose Include device from the start
page in the app.
4. Follow the instructions in the app.
Note:
The smart gateway needs internet connection
to be able to include the product to the app.
3.10.13.3 To select Exclude device
If you exclude the device, there will be no
communication between the product and the GARDENA
smart system.
To get access to the menu on
1. Do steps 1–3 in
page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Exclude device .
3. Push the OK button.
1298 - 007 - 16.09.2020
Note:
list of products in the GARDENA smart system app.
3.10.13.4 To do a check of the status for GARDENA
smart system
When the product is connected to smart system
gateway, you can do a check of the connection status.
1.
2.
Note:
connected
or
strength - Good , for the best smart system performance.
smart system >
The product must be manually deleted from the
To get access to the menu on
Do steps 1–3 in
page 23 .
Use the arrow buttons and the OK button to move
through the menu structure
Status is either connected Yes or not
The
No . The Signal strength is either Good, Poor
Bad . Put the charging station in a location with Signal
smart system > Status .
Installation - 29