Operation - Gardena 5039 Operator's Manual

To assemble the
upper handle:
4
52
6
5
1
2
To attach the cable
to the handle:
7
8
To assemble the grass box:
q
0
9
9

3. OPERATION

18
1. Put the upper handle
Make sure that the handles are completely in place and the handle
holes are inline.
5
2. Push the screws through the holes.
2
3. Put the washers and the wing nuts
4. Tighten the wing nuts
7
v Attach the cable to the handle with the clamps
Make sure that the cable is not locked between the lower and
the upper handle.
0
1. Turn the cover on the grass box.
Make sure that the cover aligns to the grass box.
0
2. Push the cover on the grass box until the connections audibly
engage.
Make sure that all connections are engaged.
q
3. Push the handle on the grass box until the connections audibly
engage.
9
4. Push the chute into the grass box and pull the chute
until it audibly engages.
DANGER! Risk of injury!
Cut injury when the mower starts accidentally.
v Wait for the blade to stop, remove the safety key and use
gloves before you adjust or transport the mower.
4
on the lower handles
6
on the screws
6
.
1
.
5
.
8
.
9
forward