Advertisement
Table of Contents
- 1 Placement of and Connecting the Charging Station
- 2 Charging the Battery and Placement of the Boundary Wire
- 3 Connecting the Boundary Wire
- 4 Placement of and Connecting the Guide Wire
- 5 Starting and Stopping
- 6 Adjust the Robotic Lawnmower to Suit Your Garden
- 7 Test Run the Mower through Narrow Passages
- 8 Table Work Capacity
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gardena R100LiC
Summary of Contents for Gardena R100LiC
- Page 1 Quick guide SILENO/SILENO+ R100Li/LiC, R130Li/LiC, R160Li/LiC...
- Page 2 GETTING STARTED WITH THE GARDENA ROBOTIC LAWNMOWER 1. Placement of and connecting the charging station See chapter 3.2 in the Operator’s Manual 1. Place the charging station at a central position in the work area, with a lot of open space in front of the charging station and on a relatively horizontal surface.
- Page 3 2 m / 7 ft Press the couplers completely together with a pair of pliers. „As a complement to this Quick Guide, there are step by step installation movies available on the GARDENA website, www.gardena.com.“ Power supply Low voltage cable...
- Page 4 It is also possible to adjust the corridor width for the guide wire. See chapter 6.7 in the Operator’s Manual. WWW.GARDENA.COM The right to make changes without prior notice is reserved. Copyright © 2016 GARDENA Manufacturing GmbH. All rights reserved. www.gardena.com 115 84 40-26...
Need help?
Do you have a question about the R100LiC and is the answer not in the manual?
Questions and answers