Gardena SILENO city Operator's Manual page 24

2
SILENO life Area, m
250
500
750
1000
1250
3.10.3.4 To copy the schedule setting
To get access to the menu on
1. Do steps 1–3 in
page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> Overview > Copy .
3. Use the arrow buttons and the OK button to copy
the schedule setting. You can copy the schedule
settings day to day or for the full week.
3.10.3.5 To reset the schedule setting
You can remove all schedule settings and use the
factory setting.
To get access to the menu on
1. Do steps 1–3 in
page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> Overview > Reset .
a) Push the arrow buttons to select
to only reset the current day to factory
settings.
b) Push the arrow buttons to select
reset all schedule settings to factory settings.
3. Push the OK button.
3.10.4 SensorControl
SensorControl automatically adjust the cutting time to
the growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note:
SensorControl , it is recommended
When using
to make as much operating time as possible available
24 - Installation
for
Recommended op-
than necessary.
erating time, h
3-4
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
7-8
and then
12-13
continue to operate or not.
16-17
Note:
operate for more than 50 hours, or if a
21-22
settings is done. SensorControl is not changed if a
Reset of schedule settings is done.
3.10.4.1 To set the SensorControl
1.
Schedule > Advanced
2.
3.
4.
3.10.4.2 To set the SensorControl frequency
Set how frequently the product cuts the grass when the
SensorControl is in use. There are 3 frequency levels:
Low, Mid and High . The higher the frequency, the more
sensitive the product is to the grass growth. That is, if
the grass growth is high then the product is allowed to
work longer.
Note:
using
adjusting. Do not restrict the schedule more than
necessary. Also, check that the blade disc is clean and
that the blades are in good condition.
Schedule > Advanced
Current day
1.
2.
All week to
3.
4.
3.10.5 Security level
There are 2 security levels for SILENO city and 3
security levels for SILENO life.
SensorControl . Do not restrict the schedule more
SensorControl selects if the product will
SensorControl is reset if the product does not
To get access to the menu on
Do steps 1–3 in
page 23 .
Use the arrow buttons and the OK button to move
through the menu structure
SensorControl .
Push the OK button to select the
Push the BACK button.
If the mowing results are not optimal when
SensorControl , the schedule settings may need
To get access to the menu on
Do steps 1–3 in
page 23 .
Use the arrow buttons and the OK button to move
through the menu structure
Cutting time .
Use the arrow buttons to select
frequency.
Push the BACK button.
Reset of all user
SensorControl > Use
SensorControl .
SensorControl >
Low, Mid or High
1298 - 007 - 16.09.2020