AMX Endeleo UDM-RX02 Operation/Reference Manual page 62

Protocols and IR Learning
FIG. 70 Assigning an Action and command string
The serial string which reflects the action must be accurate for the serial command to
work. Consult the Manufacturer's web site or documentation to ascertain the correct
string for this serial device.
8. Click on Add to create the new protocol.
9. Repeat if necessary for other serial commands which are to be stored under this protocol name.
10. Once completed the protocol can now be assigned to relevant devices, via the Protocol drop-down
menu in the Device Configuration page.
It is presumed that the serial device connected to the UDM-RX02 has the appropriate
serial settings as described and the correct serial cable/pinouts configured in order to
function correctly with the UDM-RX02.
50
Enter the Serial command string
associated with the selected Action
(consult device manufacturer's
product documentation)
Select an Action for this Serial command
UDM-0102 and UDM-RX02 Operation/Reference Guide
Click to create
the new
protocol