Configuring Audio Types For Inputs; Selecting Inputs For Display - AMX Endeleo UDM-RX02 Operation/Reference Manual

Configuration

Configuring Audio Types For Inputs

Audio types (Analog L/R or S/PDIF) can be configured for each Input. To configure audio for individual
Inputs;
1. Select the Inputs option from the available options at the top of the Status page.
2. Select the appropriate Audio type Analog L/R or S/PDIF (FIG. 24).
FIG. 24 Selecting the Audio Input Type
If "Composite" is selected as the Input type, only one audio source will be available.
Ensure audio has been connected from the Input to the rear of the hub. Ensure the
connections are sound and fixed correctly.

Selecting Inputs for Display

1. Select the Control option from the available options at the top of the Status page.
2. Each port on the hub has a drop-down menu, in which will be displayed all of the inputs available to
this particular Port (FIG. 25).
FIG. 25 Inputs available for a port
"Inputs" refers to device inputs connected directly to the UDM hub (Inputs A-B,
devices connected to IRTX ports 1 – 2).
3. Select the appropriate Input which this port will display.
24 UDM-0102 and UDM-RX02 Operation/Reference Guide